• Driver Yokogawa DA100
• Preparando um Equipamento
• Configuração do Driver
  • Parâmetros [P]
• Referência de Tags
  • Tags PLC
    • Set Skip Measure
    • Set Skip Measure Channel Interval
    • Set Measurement Period
    • Select Relay to Turn On or Off Externally
    • Set Date and Time
    • System Reconstruction
    • Set Mode Selection
    • Turn Relay Specified by VS Command On or Off
    • Byte Output Order
    • Clear RAM
  • Tags Bloco
    • Set Voltage, Thermocouple, RTD, Contact, Input or mA
    • Set Delta or RRJC
    • Set Power Monitor
    • Set Strain Input
    • Set Pulse Input
    • Set Scaling
    • Set Power Monitor Scaling
    • Set Strain Input Scaling
    • Read Measured Report Data Output
    • Read Computed Data Output
    • Read System Configuration Data
    • Read Relay Output Status
• Documentação das Interfaces de Comunicação
  • Configurações de um Driver
    • Caixa de Diálogo de Configuração
    • Aba Setup
    • Aba Serial
    • Aba Ethernet
    • Aba Modem
    • Aba RAS
  • Configurações Gerais
    • Tags de Comunicação
      • IO.CommunicationStatus
      • IO.IOKitEvent
      • IO.PhysicalLayerStatus
      • IO.SetConfigurationParameters
      • IO.WorkOnline
    • Propriedades
      • IO.ConnectionMode
      • IO.GiveUpEnable
      • IO.GiveUpTries
      • IO.InactivityEnable
      • IO.InactivityPeriodSec
      • IO.RecoverEnable
      • IO.RecoverPeriodSec
      • IO.StartOffline
      • IO.TimeoutMs
      • IO.Type
  • Configuração de Estatísticas
    • Tags de Comunicação
      • IO.Stats.Partial.BytesRecv
      • IO.Stats.Partial.BytesSent
      • IO.Stats.Partial.TimeConnectedSeconds
      • IO.Stats.Partial.TimeDisconnectedSeconds
      • IO.Stats.Total.BytesRecv
      • IO.Stats.Total.BytesSent
      • IO.Stats.Total.ConnectionCount
      • IO.Stats.Total.TimeConnectedSeconds
      • IO.Stats.Total.TimeDisconnectedSeconds
    • Propriedades
  • Configuração da Interface Ethernet
    • Tags de Comunicação
      • IO.Ethernet.IPSelect
      • IO.Ethernet.IPSwitch
      • IO.Ethernet.SocketState
    • Propriedades
      • IO.Ethernet.AcceptConnection
      • IO.Ethernet.BackupEnable[2,3]
      • IO.Ethernet.BackupIP[2,3]
      • IO.Ethernet.BackupLocalPort[2,3]
      • IO.Ethernet.BackupLocalPortEnable[2,3]
      • IO.Ethernet.BackupPort[2,3]
      • IO.Ethernet.IPFilter
      • IO.Ethernet.ListenIP
      • IO.Ethernet.ListenPort
      • IO.Ethernet.MainIP
      • IO.Ethernet.MainLocalPort
      • IO.Ethernet.MainLocalPortEnable
      • IO.Ethernet.MainPort
      • IO.Ethernet.PingEnable
      • IO.Ethernet.PingTimeoutMs
      • IO.Ethernet.PingTries
      • IO.Ethernet.ShareListenPort
      • IO.Ethernet.SupressEcho
      • IO.Ethernet.Transport
      • IO.Ethernet.UseIPv6
  • Configuração da Interface Modem
    • Tags de Comunicação
      • IO.TAPI.ConnectionBaudRate
      • IO.TAPI.Dial
      • IO.TAPI.HangUp
      • IO.TAPI.IsModemConnected
      • IO.TAPI.IsModemConnecting
      • IO.TAPI.ModemStatus
      • IO.TAPI.PhoneNumber
    • Propriedades
      • IO.TAPI.AcceptIncoming
      • IO.TAPI.ModemID
      • IO.TAPI.PhoneNumber
  • Configuração da Interface RAS
    • Tags de Comunicação
    • Propriedades
      • IO.RAS.ATCommand
      • IO.RAS.CommandTimeoutSec
  • Configuração da Interface Serial
    • Tags de Comunicação
    • Propriedades
      • IO.Serial.Baudrate
      • IO.Serial.CTSTimeoutMs
      • IO.Serial.DataBits
      • IO.Serial.DelayAfterMs
      • IO.Serial.DelayBeforeMs
      • IO.Serial.DTR
      • IO.Serial.InterbyteDelayUs
      • IO.Serial.InterframeDelayMs
      • IO.Serial.Parity
      • IO.Serial.Port
      • IO.Serial.RTS
      • IO.Serial.StopBits
      • IO.Serial.SupressEcho
      • IO.Serial.WaitCTS
• Histórico de Revisões do Driver