|
<< Click to Display Table of Contents >>
Tag Reference |
Individual Tags for communication must be used. These Tags are addressed using the Device, N1, N2, and N3 parameters, in the following format:
•Device: Panel address (ID), as configured in the file ISECIDMAC.ini
•N1: Partition
•N2: Zone
•N3: Indicates whether synthetic values must be inverted when the zone is greater than 0 (zero)
A partition represents a set of zones, there is always at least a partition 0 (zero), and zones are monitoring loops that can be in a failure or trigger state or restored or normalized. The zone 0 (zero) is a special zone that receives general events from a Panel.
The values returned to Tags are based on a number with 4 (four) digits, where the first digit, the most significant one, corresponds to 1 (one) for triggering and 3 (three) for restoring. Possible values are described on the next table.
Failure and restoration codes
Triggering or Failure Code |
Meaning |
Restoring Code |
Meaning |
|---|---|---|---|
1401 |
User deactivation |
3401 |
User activation |
NA |
NA |
3456 |
Partial activation |
1130 |
Zone triggering |
3130 |
Restoration from zone triggering |
1133 |
24h-zone triggering |
3133 |
Restoration from 24h-zone triggering |
1146 |
Quiet triggering |
3146 |
Restoration from quiet triggering |
1131 |
Wired fence triggering |
3131 |
Restoration from wired fence triggering |
1371 |
Cut on detector wiring |
3371 |
Restoration from cut on detector wiring |
1372 |
Short-circuit on detector wiring |
3372 |
Restoration from short-circuit on detector wiring |
1383 |
Detector tamper |
3383 |
Restoration from detector tamper |
1333 |
Problem on bar device |
3333 |
Restoration from problem on bar device |
1145 |
Keyboard tamper |
3145 |
Restoration from keyboard tamper |
1570 |
Temporary nullification of zone |
NA |
NA |
1573 |
Nullified by triggering |
NA |
NA |
1301 |
Power failure |
3301 |
Restoration from power failure |
1302 |
Main battery low or short-circuited |
3302 |
Restoration from main battery low or short-circuited |
1311 |
Main battery unavailable or inverted |
3311 |
Restoration from main battery unavailable or inverted |
1300 |
Overload on auxiliary output |
3300 |
Restoration from overload on auxiliary output |
1321 |
Failure or short-circuit on alarm wiring |
3321 |
Restoration from failure or short-circuit on alarm wiring |
1351 |
Phone line failure |
3351 |
Restoration from phone line failure |
1384 |
Low battery of wireless detector |
3384 |
Restoration from low battery of wireless detector |
1407 |
Deactivation via keyboard or phone |
3407 |
Activation via keyboard or phone |
1403 |
Auto-deactivation |
3403 |
Auto-activation |
NA |
NA |
3408 |
Activation by key |
1100 |
Medical emergency |
NA |
NA |
1110 |
Trigger or fire panic |
3110 |
Restoration from trigger or fire panic |
1121 |
Coercion password |
NA |
NA |
1122 |
Quiet panic |
NA |
NA |
1120 |
Audible or quiet panic |
NA |
NA |
1305 |
Reset via programming mode |
NA |
NA |
1306 |
Change on Panel programming |
NA |
NA |
1354 |
Failure to communicate events |
NA |
NA |
1461 |
Incorrect password |
NA |
NA |
1410 |
Remote access using download or upload application |
NA |
NA |
1413 |
Download failure |
NA |
NA |
1601 |
Manual test |
NA |
NA |
Recurring test |
NA |
NA |
|
1616 |
Maintenance request |
NA |
NA |
1621 |
Reset of event buffer |
NA |
NA |
1624 |
Event log full |
NA |
NA |
1625 |
Date and time were reset |
NA |
NA |
1147 |
Failure on Smart supervising |
3147 |
Restoration from Smart supervising |
1422 |
PGM triggering |
3422 |
PGM un-triggering |
1322 |
Reception signal |
NA |
NA |
1531 |
NA |
3531 |
Device found |
1360 |
Failure of GPRS Keep Alive |
3360 |
Restoration from failure of GPRS Keep Alive |
1361 |
Failure of Eth Keep Alive |
3361 |
Restoration from failure of Eth Keep Alive |